Restart Usb Port 1.0.4 Free Download

Restart Usb Port 1.0.4 is a command-line tool that permits you to restart any USB port when encountering issues eliminating the need to restart your machine.

Restart Usb Port 1.0.4 is nothing more than a simple utility. It does exactly what is advertised, more precisely Restart Usb Port 1.0.4 that are misbehaving or registering unknown errors. It is a CMD-type app which means you’ll need a bit of expertise to run it properly and register the required results. Regardless, the program gives some information as to what particular strings to use for needed action.

Restart Usb Port 1.0.4 is relatively straightforward, with no bells, no whistles, just a simple little tool to restart a USB port experiencing issues when attempting to use it. First off, you’ll need to figure out which port can be restarted. This procedure is listed below. Once you have that info, you can move on to restarting the port.Here is everything you need to know about this situation and several proven methods of performing a reset on USB ports no matter with or without physically disconnecting/connecting from the PC.

This article helps you fix the problem.

Resolution

To fix this problem, use the following methods in the order in which they are listed. After each method, check the USB device to see whether the problem is fixed. If the problem is not fixed, try the next method.

This article also includes a workaround that you can try if these methods do not work.

 1: Use Device Manager to scan for hardware changes

After your computer scans for hardware changes, it might recognize the USB device that is connected to the USB port so that you can use the device.

To scan for hardware changes, follow these steps:

  1. Click Start, and then click Run.Note If you are running Windows Vista, click Start, and then use the Start Search
  2. Type devmgmt.msc, and then click OK. Device Manager opens.
  3. In Device Manager, click your computer so that it is highlighted.
  4. Click Action, and then click Scan for hardware changes.
  5. Check the USB device to see whether it is working.

Scanning for hardware changes fixed the problem, you are finished. If this method did not fix the problem, go to Method 2.

 2: Restart the computer

If scanning for new hardware did not fix the problem, try restarting the computer. After the computer has restarted, check the USB device to see whether it is working.

Restarting the computer fixed the problem, you are finished. If this method did not fix the problem, go to Method 3.

 3: Disable and re-enable the USB controller

Use Device Manager to disable and re-enable all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition. The USB controllers represent the USB ports in Device Manager. If you are not comfortable with advanced troubleshooting, try the steps in the “Workaround” section.

To disable and re-enable the USB controllers, follow these steps:

  1. Click Start, and then click Run.Note If you are running Windows Vista, click Start, and then use the Start Search
  2. Type devmgmt.msc, and then click OK. Device Manager opens.
  3. Expand Universal Serial Bus controllers.Note You might have to scroll down the list to find this item.
  4. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstallto remove it.
  5. Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.
  6. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
  7. Check the USB device to see whether it is working.

The USB port recognizes the device and if you can use the device, you are finished.

This method fixed the problem, you are finished. If this method did not fix the problem, go to the “Workaround” section.

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  1. If the DisableSelectiveSuspendregistry entry is present, double-click it. If it is not present, create the entry. To create the entry, follow these steps:
    1. On the Editmenu, point to New, and then click DWORD.
    2. Type DisableSelectiveSuspend, and then press ENTER.
    3. On the Editmenu, click Modify.
  2. In the Value data field, type 1 to disable the Selective Suspend feature, and then click OK.

Now go to the “Did this fix the problem?” section.

Cause

This problem may occur because of a timing issue that prevents the computer from detecting the USB device.
Microsoft and the hardware vendors that manufacture the chips that are used for USB have investigated the problem. However, the results were inconclusive because of the intermittent nature of the problem.

 

Download Setup Here
Share

You may also like...

Leave a Reply

%d bloggers like this: